Ķivere ar sejas aizsargu (74201)

Protective helmet is a second category of protection designed to protect the upper part of the head from injuries caused by falling objects. The protective helmet was fitted with a peak and adjustable tether (carrier system). The helmet shell was made of ABS plastic. The helmet around the crust has a drainage trough. At the top of the helmet are placed ventilation openings.
The helmet has an accessory in the form of ear muffs with sealing cushions made of PVC, mounted on it by means of semiaxial springs made of steel wire.
The helmet is equipped with a retractable mesh face shield designed to provide individual eye and face protection against mechanical hazards. The casing protects against high speed particle impacts. The casing mesh is made of steel.
Destination / Application
Head, eye and hearing protection, specific hazards in the workplace of the internal combustion engine.
How to use
The helmet carrier system allows adjustment in the range of 50 to 66 centimeters. To adjust the length of the head strap, set its desired length
Use the knob located on the tape at the back of the helmet. Make sure the helmet does not move during movement and will not cause any pressure. It is also possible to adjust the height of the headband belt to the carrier system. Four hooks are used, the tapes should be retracted through the holes of the support system attached to the shell of the helmet. It is time to suppress the ear muffs so that the ear canals are completely inside the muff. The rim of the sealing cushion should be firmly attached to the head around the ear. The ear canal height can be adjusted in the vertical plane. Helmet-mounted ear muffs meet the requirements for small, medium and large size. If the earmuffs are not worn, they should be raised and rotated to place them on the back of the helmet. Remove the ear muffs from the helmet by squeezing the latch, then slide the catch from the mounting slot. For mounting, simply insert the catch into the mounting slot. The helmet is supplied with a removable mesh face shield. For installation, place the middle opening of the guard over the hook on the grip and move it to prevent the grid from separating from the grip. Then, by folding the grille on the grip, the grids of the mesh should be slid over the tabs and turned so that the grid is firmly fixed in the grip. The VOREL 74463 and VOREL 74464 covers are also fitted outside the grille. The mesh grip of the face shield is adjustable to allow the grille to be closer or to the face. Just move the cover forward or backward. Ensure that both controls are aligned.
Contents of the package
Helmet (helmet) protective.
Ear protection ear muffs.
Mesh face shield.
User manual.
Technical data
Index Number 74201
EAN 5906083742019
Brand Flo
unit KPL
Gross Weight (kg) 1.1880
Master Carton MC 8
Protection category II
plastic 1784.1794
Weight [g] 1188
yellow
size 50-66