The mesh face shield is a category II eye and face protection designed to protect against mechanical hazards. Cover
It protects against high speed particle impacts.
Ear muffs type B004 with compression spring on top of the head, compression spring made of plastic, sealing cushion
With flexible foam. The earmuffs can be removed from the face shield and worn separately.
Destination / Application
Protects the face from impact of particle material such as sawing or mowing and hearing from excessive noise.
How to use
Recommended face shield:
Before using the shroud, inspect the shroud for damage. Shield with cracked or damaged safety net or
With visible signs of corrosion can not be used. In this case, the cover should be replaced with a new model, for example model 74463 or 74464.
Place the cover on the head, adjust the upper strap if necessary so that the cover is at the correct height. By turning the knob on the back of the head strap, adjust its length so that it does not squeeze while working, while the cover does not move during head movements. With the side knobs adjust the force needed to lower and raise the front cover with the cover.
In the vicinity of the knobs, an adjusting element is provided on the inner side of the front cover to allow the angle of the front guard to be adjusted at the maximum of lowering and raising.
In order to adjust, adjust the protrusions of the adjusting elements through the eyes of the face guard. Ensure that both controls are aligned. Along the upper edge, the protective window has holes with which it is attached to the face guard. If you need to swap the fastener, turn the catches on the front cover so that you can shoot fast. Remove the old protective glass. Assemble the new start from the middle hole and then swing the side holes through the hooks to fasten the cover to the front cover. Make sure all hooks are turned in such a way that the safety guard can not be disassembled automatically. After finishing work, clean the cover with a soft cloth or a soft brush. Remove larger soils with soapy water and dry with a cloth. Do not use agents that can corrode the mesh in the sheath.
How to adjust the ear muffs: Set the muffling damper so that the descriptions on the canopy body are not reversed when wearing the ear muffs. Place ear muffs on the head so that the ear canals are completely inside the muff. The rim of the sealing cushion should be firmly attached to the head around the ear. Adjust the height of the compression spring so that it rests against the top of the head.
Contents of the package
Mesh face shield.
Ear protection ear muffs.
Instruction.
Technical data
Index Number 74462
EAN 5906083744624
Marka Vorel
unit KPL
Gross Weight (kg) 0.5000
Master Carton MC 40
Protection category II
Plastic material
Weight [g] 500
adjustable clasp
MESH SIZE: 395x200MM, MESH WITH ALUMINIUM RIM, MATERIAL OF EAR CUPS: ABS, FOAM INSERT, PVC COVER, POM HEADBAND, IT CAN BE WORN IN 3 POSSITIONS, UNIVERSAL SIZE, ADJUSTABLE HEADBAND, SNR 25 Db
