Rechargeable YATO workshop lamp with 330lm main light and 80lm flashlight. The model equipped with a capacious, lithium-ion battery with a capacity of 2600mAh will provide a minimum of 4 hours of continuous operation. Made of durable materials, incl. ABS and polycarbonate, which ensure the mechanical protection class IK07 and the tightness class IP54. The rotating body, 2 hooks and 3 magnets allow for the correct setting of the light beam
SOURCE OF LIGHT:
Diode: 3,5W SMD LED + 3W POWER LED
Lumens: 330lm main light, 80lm flashlight
Color: 6000K
SOURCE OF ENERGY:
Battery: LI-ION 3.7V 2600mAh
Working time: 4h
Charging time: 4h
Charging: 230V mains charger + USB cable
CONSTRUCTION AND FEATURES:
Material: ABS + rubber
Diffuser: polycarbonate (PC)
Rotating body
2 hooks
2 magnets on the back of the lamp and a magnet in the base
IP54 tightness class
Mechanical protection class IK07
Dimensions: 25 x 5.5 x 4cm
ABS – it is characterized by very high hardness, which makes it highly resistant to scratches, impacts and dents. Additionally, it is resistant to various chemical factors.
IP54 – protection against access to hazardous parts by wire and protection against dust as well as protection against splashes of water from any direction
IK07- IK is a mechanical resistance classification defined in EN 62262 and IEC 62262: 2002. The higher the numerical value on a scale of 0-10, the higher the endurance level. IK07 means resistance to an impact with an energy of 2J (in practice, a hammer blow weighing 0.5 kg from a height of 40 cm
POLYCARBONATE (PC) – characterized by very high resistance and stiffness. Resistant to high-energy radiation, as well as UV and weather conditions. All this with very good light penetration
YT-085081 is a continuation of the YT-08508 model with a new, more powerful diode and a more capacious battery. The YT-08508 model has been discontinued
