Unit: PCS
Working temperature [° C]: 2800
Gas consumption: 142g / h
Piezo ignition: Yes
Feed gas: Propane
Professional turbo gas burner YT-36715.
YATO torch designed for professional use. Especially recommended for plumbing and installation works it is possible to:
brazing – copper pipes up to 32mm in diameter
soft soldering – copper pipes up to 100mm in diameter
welding.
Thanks to the use of the highest quality components, such as a brass body, the burner allows to achieve a temperature of 28000C and a power of 2.0 kW. It is powered by propane gas or a MAPP mixture, which allows achieving very high operating parameters without connecting additional gas cylinders. The gas consumption is 142g / h and the pressure is 2.59MPa.
The burner is equipped with a TURBO nozzle that produces a swirl flame. As a result, the gas flow increases, which results in much higher efficiency and faster heating of the pipes.
The YATO burner has a number of very useful functions:
PIEZO ignition – facilitates gas ignition without the need for an external igniter
trigger lock – prevents accidental switching on the burner
block for continuous operation – especially useful during long work. It allows you to lock the torch in the on position without having to hold the button
gas regulation – allows you to adjust the flame power depending on your needs
An important advantage of the YATO torch is the AUTO START / STOP function. Thanks to the special design and built-in valve, the burner operation is very convenient and allows it to be operated with just one hand. The burner is started by pressing a single button and works only when it is pressed. However, after releasing the button the burner will automatically turn off. It is not necessary to turn off the gas supply every time. It greatly simplifies and speeds up the work. In addition, it reduces gas consumption.
The YATO torch can work at an angle of 3,600, which allows you to work safely in any position, even in the most difficult places.
The burner has a connection for a gas cylinder with a G1 “F thread. Additionally, the set includes an adapter enabling the connection of a cylinder with a G7 / 16” F connection. Thanks to this, it is possible to connect both types of cylinders used on the market to the YATO torch.
FLAME MAX TEMPERATURE 2800 CELS. DEGREES; WELDING MAX TEMPERATURE: ABOVE 1300 CELS.DEGREES; ALL BRASS BODY; AIR PRESSURE 2.59MPA (375PSI); NOMINAL HEAT INPUT: 2,0KW; WELDING DIAMETER: SOFT SOLDER: MAX.DIAM.100MM, BRAZING: MAX.DIAM. 32MM; AUTO START- STOP IGNITION LIGHT; FLAME EXTINGUISHES BOTTOM; FLAME ADJUSTING KNOB; PIEZO IGNITION; RUN-LOCK BOTTOM FOR CONTINOUS WORK; SWIRL/ TURBO NOZZLE; INLET THREAD: G1″F; INCLUDING ADAPTER: G1″M x G7/16″F; MAP-PRO/ PROPAN; FUEL CONSUMPTION: 142G/H; APPLICATION: BRAZING OF BRASS PIPES UPTO 22MM, HEAT TREATING, LARGE DIAMETER SOLDERING, LIGHT WELDING
