Long roofing torch with 60mm nozzle, designed for professionals who cover large areas of roof with thermal seal. The length of the burner allows you to work in a standing position, high thermal efficiency / nozzle fi 60mm /, greatly speeds up work. The handle has a special valve to close the gas supply when the burner is set. This solution saves a great deal of gas consumption.
TECHNICAL PARAMETERS:
• Number of cups of burners – 1
• Size of chalices [mm] – 60
• Nominal gas pressure [MPa] – 1.2
• Flame temperature [ºC] – 800-1200
• Nominal flow [g / h] – 4000
• Heat load [kW] – 58
• Length of the hose [m] – 5
• Burner length (without hose length) [mm] – 1315
Destination / Application
Gas burner for heating, dehumidification and roofing. Thanks to the use of pressurized butane (but also propane butane gas), it is possible to work in a place with no energy sources.
How to use
Assemble the unit according to the operating instructions. Tighten the hose to the assembled equipment. Tighten the other end of the hose to the gas bottle.
Check the tightness of the joints by loosening the cylinder valve a bit, then apply soapy water to the joints. In the event of gas bubbles, tighten the gas supply and tighten the leaky connections. Repeat the procedure until the gas is completely tight
Unscrew the gas valve in the cylinder and then unscrew the valve of the device, but only enough to allow the gas outlet. Ignite the gas at the outlet of the cup. For this purpose use a special lighter designed to ignite portable gas burners. After about 20 seconds, press the burner lever. In case of too short flame, set the gas pressure using the burner valve. When the lever is released, the flame will return to the austerity mode.
When the work is done, close the cylinder valve and then, after flame extinguishing, put the burner on a non-flammable surface to cool down. After cooling down, proceed to maintenance.
For assembly, operation and maintenance details of the unit, see the enclosed operating instructions.
Contents of the package
• Burner (G3 / 8 “-19) with 60mm nozzle
• 5 m hose (G3 / 8 “-19, 21.8-14)
Technical data
Index Number 73342
EAN 5906083733420
Marka Vorel
PCS unit
Gross Weight (kg) 2.1380
Master Carton MC 8
Pal 64
FLAME TEMP. 800°C~1200°C; HEAT POWER 58KW; GAS CONSUMPTION 4000 G/H; GAS TORCH WITH FLAME ADJUSTMENT; HOSE LENGTH 5M
BURNER DIA.: 60MM; CONNECTOR LENGTH 100CM