Precise plunge-cut saw for carpentry work comparable to the best devices in its class. Designed for precise and quick cutting of laminates: kitchen worktops under the sink, expansion joint for panels and floor boards, as well as furniture boards without nicks, as well as for undercutting doors.
Equipped with engine control electronics that allows safe plunge cutting as well as during reverse movement (useful when cutting internal corners). The soft start and constant speed options are common in devices of the highest class and also have an impact on the gear life.
The working base made of duralumin and ground after casting is stable and precise. The machine comes complete with a solid parallel guide, mounted on double brackets, which ensure rigidity of the structure and no problems with wedging the disc when working with the guide.
The plunge-cut saw has a built-in thermal switch and is designed to work with a 1.4 m long guide bar, Art. No. YT-82169. The inspection window located on the side of the engine enables the visibility of the cutting edge during works forcing cutting, eg at a vertical wall (minimum distance of 16mm from the edge of the vertical element).
High cutting precision also enables cutting out the grooves in the tongue-and-groove connections.
Power 1300W
Adjustable speed 20000-6200 rpm
Wheel 165mm x 20mm
The kerf thickness is 2.4mm
Soft start
Constant speed
High-class parallel guide included – on two rigid supports
Works with the 1.4m YT-82169 guide rail (not included in the set) – you can connect the strips, e.g. for cutting along furniture boards (e.g. 1.4m x 2 = 2.8mb)
Cutting depth 90 ° / 45 ° 55mm / 38mm
